绿帽社

Lyle Lovett and Leo Kottke Coming to New Philadelphia

Lovett and Kottke show at the PAC

   Announcing a brand-new concert added to the Performing Arts Center at 绿帽社 - Tuscarawas season; Lyle Lovett and Leo Kottke: In Conversation and Song is coming to New Philadelphia on Sunday, October 29 at 7:30 p.m. Four-time Grammy-winning singer, composer and actor Lyle Lovett is set for a co-headline run of Midwestern tour dates with two-time Grammy-nominated guitarist Leo Kottke. The limited six-show run will feature Lovett and Kottke in conversation and song. About Lyle Lovett A singer, composer and actor, Lyle Lovett has broadened the definition of...

Faculty and Alumni Collaborate to Debut Off Broadway
College of the Arts

Piedmont Point play poster

The School of Theatre and Dance faculty and alumni are collaborating on a new play, Piedmont Point. Written by alumnus Scott Miesse (鈥15), Piedmont Point centers around a retirement complex in southern Florida. The play is set to premiere on August 25, 2023 to a sold-out crowd at Theatre Row, an Off-Broadway playhouse in NYC. Additional performances will be on August 26 at 8 p.m. and August 27 at 2 p.m. In addition to Miesse, the show features other 绿帽社faculty and alumni. Piedmont Point is directed by Amy Fristche, associate professor of acting and musical theatre, with alumna Abiga...

Engineering Technology - B.S.

The Bachelor of Science in Engineering Technology program prepares you for a career in the dynamic field of engineering. With a curriculum focused on the latest trends and technologies in engineering, you'll gain the skills and knowledge needed to succeed in a variety of roles. Enroll now and take the first step toward a fulfilling career in engineering.

Contact Us

Apply Now
Request Info
Schedule a Visit

Program Information for Engineering Technology - B.S.

Program Description

Full Description

The Bachelor of Science degree in Engineering Technology focuses primarily on the applied aspects of science and engineering and prepares graduates for practice in that portion of the technological spectrum closest to product improvement, manufacturing, construction and engineering operational functions.

The Engineering Technology major comprises the following concentrations:

  • The Electrical/Electronics concentration allows seamless articulation with technical associate degrees for students who wish to advance their careers in the electrical/electronic engineering field. Electrical engineers and technologists design, develop, test and supervise the manufacturing of electrical equipment, such as electric motors, radar and navigation systems, communications systems, and power generation equipment. Electronics engineers design and develop electronic equipment, such as broadcast and communications systems-from portable music players to global positioning systems (GPS).
  • The Integrated Engineering Technology concentration permits graduates from a variety of associate degree backgrounds to formulate a program of advanced study in upper-division technical courses, chosen with a faculty advisor, to gain additional technical depth or breadth.
  • The Mechanical/Systems concentration allows seamless articulation with technical associate degrees for students who wish to advance their careers in the mechanical or manufacturing field. Mechanical engineering technology is one of the broadest engineering disciplines. Mechanical engineers and technologists design, develop, build and test mechanical and thermal devices, including tools, engines and machines. Graduates of this program can expect to work mostly in engineering services, research and development, manufacturing industries and the federal government.

Examples of Possible Jobs

  • Applications Engineer
  • Controls Engineer
  • Design Engineer
  • Electrical Engineer
  • Engineering Project Coordinator
  • Electrical/Systems Engineer
  • Manufacturing Engineer
  • Product Engineer
  • Quality Engineer

Admissions for Engineering Technology - B.S.

Admission Requirements

The university affirmatively strives to provide educational opportunities and access to students with varied backgrounds, those with special talents and adult students.

First-Year Students on the Kent Campus: First-year admission policy on the Kent Campus is selective. Admission decisions are based upon cumulative grade point average, strength of high school college preparatory curriculum and grade trends. Students not admissible to the Kent Campus may be administratively referred to one of the seven regional campuses to begin their college coursework. For more information, visit the .

First-Year Students on the Regional Campuses: First-year admission to Kent State’s campuses at Ashtabula, East Liverpool, Geauga, Salem, Stark, Trumbull and Tuscarawas, as well as the Twinsburg Academic Center, is open to anyone with a high school diploma or its equivalent. For more information on admissions, contact the Regional Campuses admissions offices.

International Students: All international students must provide proof of proficiency of the English language (unless they meet specific exceptions) through the submission of an English language proficiency test score or by completing English language classes at Kent State’s English as a Second Language Center before entering their program. For more information, visit the admissions website for international students.

Former Students: Former 绿帽社students who have not attended another institution since 绿帽社and were not academically dismissed will complete the re-enrollment process through the Financial, Billing and Enrollment Center. Former students who attended another college or university since leaving 绿帽社must apply for admissions as a transfer or post-undergraduate student.

Transfer Students: Students who attended an educational institution after graduating from high school or earning their GED must apply as transfer students. For more information, visit the admissions website for transfer students.

Admission policies for undergraduate students may be found in the University Catalog's .

Students may be required to meet certain criteria to progress in their program. Any progression requirements will be listed on the program's Coursework tab

Learning Outcomes

Program Learning Outcomes

Graduates of this program will be able to:

  1. Apply knowledge, techniques, skills and modern tools of mathematics, science, engineering and technology to solve broadly-defined engineering problems appropriate to the disciplines in engineering technology.
  2. Design systems, components or processes meeting specified needs for broadly-defined engineering problems appropriate to the discipline.
  3. Apply written, oral and graphical communication in broadly-defined technical and non-technical environments; identify and use appropriate technical literature.
  4. Conduct standard tests, measurements and experiments; analyze and interpret the results to improve processes.
  5. Function effectively as a member as well as a leader on technical teams.
  6. Understand professional engineering and ethical responsibilities.

Coursework

On This Page

Program Requirements

Major Requirements

Major Requirements (courses count in major GPA)
CS 10051COMPUTER SCIENCE PRINCIPLES (KMCR) 3-4
or EERT 32003 TECHNICAL COMPUTING
ENG 20002INTRODUCTION TO TECHNICAL WRITING 3
or OTEC 26638 BUSINESS COMMUNICATIONS
ENGR 31000CULTURAL DYNAMICS TECHNOLOGY (WIC) 1, 23
or ENGT 33092 ENGINEERING TECHNOLOGY INTERNSHIP AND PROFESSIONAL DEVELOPMENT (ELR) (WIC)
ENGR 36620PROJECT MANAGEMENT IN ENGINEERING 3
ENGR 43080INDUSTRIAL AND ENVIRONMENTAL SAFETY 3
ENGT 31010ENGINEERING AND PROFESSIONAL ETHICS 3
ENGT 33700QUALITY TECHNIQUES 3
ENGT 43099ENGINEERING TECHNOLOGY CAPSTONE (ELR) 3
ENGT 43363MATERIALS SCIENCE AND TECHNOLOGY 3
Additional Requirements (courses do not count in major GPA)
ECON 22060PRINCIPLES OF MICROECONOMICS (KSS) 3
MATH 11010ALGEBRA FOR CALCULUS (KMCR) 3
MATH 11012INTUITIVE CALCULUS (KMCR) 3
MATH 11022TRIGONOMETRY (KMCR) 3
OTEC 26636PROJECT MANAGEMENT FOR ADMINISTRATIVE PROFESSIONALS 1
UC 10001FLASHES 101 1
Physics Elective, choose from the following:3-5
PHY 12201
TECHNICAL PHYSICS I (KBS) (KLAB)
PHY 13001
& PHY 13021
GENERAL COLLEGE PHYSICS I (KBS)
and GENERAL COLLEGE PHYSICS LABORATORY I (KBS) (KLAB)
43
6
6-9
0-3
General Electives (total credit hours depends on earning 120 credit hours, including 39 upper-division credit hours) 313
Concentrations
Choose from the following:45
Electrical/Electronics
Integrated Engineering Technology
Mechanical/Systems
Minimum Total Credit Hours:120
1

A minimum C grade must be earned to fulfill the writing-intensive requirement.

2

 is repeatable for a maximum of 6 credit hours.

3

A maximum of 3 credit hours of the following course ENGT 43092 may be used to fulfill the general electives.

4

If students complete the American Civic Literacy requirement by taking HIST 12061, the course will apply to the Kent Core Humanities category. If they complete it with POL 10101, the course will apply to the Kent Core Social Sciences category.

Electrical/Electronics Concentration Requirements

Concentration Requirements (courses count in major GPA)
ENGT 30000ADVANCED MANUFACTURING 3
or ENGT 43700 COMPUTER-INTEGRATED MANUFACTURING
ENGT 33000INTRODUCTION TO PROGRAMMABLE LOGIC CONTROLLERS 3
or ENGR 33031 PROGRAMMABLE LOGIC CONTROLLERS
Concentration Electives, choose from the following:9
EERT 32005
INSTRUMENTATION
ENGT 31032
ENERGY AND POWER GENERATION
ENGT 32006
ECONOMIC DECISION ANALYSIS FOR ENGINEERING TECHNOLOGY
ENGT 33016
PC/NETWORK ENGINEERING AND TROUBLESHOOTING
ENGT 33095
SPECIAL TOPICS IN ENGINEERING TECHNOLOGY
ENGT 33223
ELECTRONIC COMMUNICATION
ENGT 33225
INDUSTRIAL CONTROL SYSTEMS
ENGT 42002
ENERGY MANAGEMENT SYSTEMS
ENGT 42003
LEAN AND SIX SIGMA FOR COMPETITIVE MANUFACTURING
ENGR 43220
ELECTRICAL MACHINERY
Applied Electives, choose from the following: 127
MERT 12000
ENGINEERING DRAWING
Other courses as approved by program director
Additional Requirements (courses do not count in major GPA)
Physics Elective, choose from the following:3-5
PHY 13002
& PHY 13022
GENERAL COLLEGE PHYSICS II (KBS)
and GENERAL COLLEGE PHYSICS LABORATORY II (KBS) (KLAB)
PHY 13012
& PHY 13022
COLLEGE PHYSICS II (KBS)
and GENERAL COLLEGE PHYSICS LABORATORY II (KBS) (KLAB)
Minimum Total Credit Hours:45
1

Students who have earned an associate degree in the Electrical and Electronic Engineering Technology program will have 27 credits of technical coursework articulate to the bachelor’s degree program and will not have to take the electives for a minor or individualized specialization.

Integrated Engineering Technology Concentration Requirements

Concentration Requirements (courses count in major GPA)
ENGT 32006ECONOMIC DECISION ANALYSIS FOR ENGINEERING TECHNOLOGY 3
ENGT 42003LEAN AND SIX SIGMA FOR COMPETITIVE MANUFACTURING 3
Concentration Electives, choose from the following:9
ENGT 30000
ADVANCED MANUFACTURING
ENGT 31032
ENERGY AND POWER GENERATION
ENGT 33000
INTRODUCTION TO PROGRAMMABLE LOGIC CONTROLLERS
ENGT 33225
INDUSTRIAL CONTROL SYSTEMS
ENGT 42002
ENERGY MANAGEMENT SYSTEMS
ENGT 43700
COMPUTER-INTEGRATED MANUFACTURING
Applied Electives, choose from the following: 127
Other courses as approved by program director
Additional Requirements (courses do not count in major GPA)
3
Minimum Total Credit Hours:45
1

Students who have earned an associate degree in the Engineering Technology program will have 27 credits of technical coursework articulate to the bachelor’s degree program and will not have to take the electives for a minor or individualized specialization.

Mechanical/Systems Concentration Requirements

Concentration Requirements (courses count in major GPA)
ENGT 30000ADVANCED MANUFACTURING 3
or ENGT 43700 COMPUTER-INTEGRATED MANUFACTURING
MERT 32004MACHINE DESIGN 3
or MERT 42000 THERMODYNAMICS FOR ENGINEERING TECHNOLOGY
Mechanical/Systems Concentration Electives, choose from the following:9
EERT 32005
INSTRUMENTATION
ENGR 43220
ELECTRICAL MACHINERY
ENGT 31032
ENERGY AND POWER GENERATION
ENGT 32101
POLYMERS I
ENGT 33016
PC/NETWORK ENGINEERING AND TROUBLESHOOTING
ENGT 33225
INDUSTRIAL CONTROL SYSTEMS
ENGT 32006
ECONOMIC DECISION ANALYSIS FOR ENGINEERING TECHNOLOGY
ENGT 33000
INTRODUCTION TO PROGRAMMABLE LOGIC CONTROLLERS
ENGT 33095
SPECIAL TOPICS IN ENGINEERING TECHNOLOGY
ENGT 42002
ENERGY MANAGEMENT SYSTEMS
ENGT 42003
LEAN AND SIX SIGMA FOR COMPETITIVE MANUFACTURING
ENGR 33031
PROGRAMMABLE LOGIC CONTROLLERS
MERT 34002
ADVANCED SOLID MODELING
MERT 42000
THERMODYNAMICS FOR ENGINEERING TECHNOLOGY
Applied Electives, choose from the following: 127
EERT 22014
MICROPROCESSORS AND ROBOTICS
Other courses as approved by program director
Additional Requirements (courses do not count in major GPA)
Physics Elective, choose from the following:3-5
PHY 13002
& PHY 13022
GENERAL COLLEGE PHYSICS II (KBS)
and GENERAL COLLEGE PHYSICS LABORATORY II (KBS) (KLAB)
PHY 13012
& PHY 13022
COLLEGE PHYSICS II (KBS)
and GENERAL COLLEGE PHYSICS LABORATORY II (KBS) (KLAB)
Minimum Total Credit Hours:45
1

Students who have earned an associate degree in the Mechanical Engineering Technology program will have 27 credits of technical coursework articulate to the bachelor’s degree program and will not have to take the electives for a minor or individualized specialization.

Graduation Requirements
Minimum Major GPA Minimum Overall GPA
2.000 2.000
  • Students may not declare more than one concentration in the Engineering Technology major.
Roadmap

On This Page

Roadmap

This roadmap is a recommended semester-by-semester plan of study for this program. Students will work with their advisor to develop a sequence based on their academic goals and history. Courses designated as critical (!) must be completed in the semester listed to ensure a timely graduation.

Electrical/Electronics Engineering Technology Concentration

This roadmap is a recommended semester-by-semester plan of study for this program. Students will work with their advisor to develop a sequence based on their academic goals and history. Courses designated as critical (!) must be completed in the semester listed to ensure a timely graduation.

Plan of Study Grid
Semester OneCredits
MATH 11010 ALGEBRA FOR CALCULUS (KMCR) 3
UC 10001 FLASHES 101 1
Applied Electives 7
American Civic Literacy Requirement 3
 Credit Hours14
Semester Two
ENG 20002
or OTEC 26638
 INTRODUCTION TO TECHNICAL WRITING
or BUSINESS COMMUNICATIONS
3
MATH 11022 TRIGONOMETRY (KMCR) 3
Applied Electives 7
Kent Core Requirement 3
 Credit Hours16
Semester Three
MATH 11012 INTUITIVE CALCULUS (KMCR) 3
Physics Elective 3-5
Applied Electives 7
Kent Core Requirement 3
 Credit Hours16
Semester Four
OTEC 26636 PROJECT MANAGEMENT FOR ADMINISTRATIVE PROFESSIONALS 1
Physics Elective 3-5
Applied Electives 6
General Elective 3
 Credit Hours14
Semester Five
CS 10051
or EERT 32003
 COMPUTER SCIENCE PRINCIPLES (KMCR)
or TECHNICAL COMPUTING
3-4
ECON 22060 PRINCIPLES OF MICROECONOMICS (KSS) 3
ENGT 30000
or ENGT 43700
 ADVANCED MANUFACTURING
or COMPUTER-INTEGRATED MANUFACTURING
3
ENGT 31010 ENGINEERING AND PROFESSIONAL ETHICS 3
ENGT 33700 QUALITY TECHNIQUES 3
 Credit Hours15
Semester Six
ENGR 36620 PROJECT MANAGEMENT IN ENGINEERING 3
Concentration Elective 3
Kent Core Requirement 3
General Elective 6
 Credit Hours15
Semester Seven
ENGT 33000
or ENGR 33031
 INTRODUCTION TO PROGRAMMABLE LOGIC CONTROLLERS
or PROGRAMMABLE LOGIC CONTROLLERS
3
ENGT 43363 MATERIALS SCIENCE AND TECHNOLOGY 3
Concentration Elective 3
Kent Core Requirement 3
General Elective 3
 Credit Hours15
Semester Eight
ENGR 31000
or ENGT 33092
 CULTURAL DYNAMICS TECHNOLOGY (WIC)
or ENGINEERING TECHNOLOGY INTERNSHIP AND PROFESSIONAL DEVELOPMENT (ELR) (WIC)
3
ENGR 43080 INDUSTRIAL AND ENVIRONMENTAL SAFETY 3
ENGT 43099 ENGINEERING TECHNOLOGY CAPSTONE (ELR) 3
Concentration Elective 3
Kent Core Requirement 3
 Credit Hours15
 Minimum Total Credit Hours:120
 

Integrated Engineering Technology Concentration

This roadmap is a recommended semester-by-semester plan of study for this major. However, courses designated as critical (!) must be completed in the semester listed to ensure a timely graduation.

Plan of Study Grid
Semester OneCredits
MATH 11010 ALGEBRA FOR CALCULUS (KMCR) 3
UC 10001 FLASHES 101 1
American Civic Literacy Requirement 3
Applied Electives 6
General Elective 3
 Credit Hours16
Semester Two
MATH 11022 TRIGONOMETRY (KMCR) 3
Applied Electives 9
Kent Core Requirement 3
 Credit Hours15
Semester Three
MATH 11012 INTUITIVE CALCULUS (KMCR) 3
Applied Electives 6
Physics Elective 3-5
Kent Core Requirement 3
 Credit Hours15
Semester Four
ENG 20002
or OTEC 26638
 INTRODUCTION TO TECHNICAL WRITING
or BUSINESS COMMUNICATIONS
3
Applied Electives 6
Kent Core Requirement 3
General Elective 3
 Credit Hours15
Semester Five
CS 10051
or EERT 32003
 COMPUTER SCIENCE PRINCIPLES (KMCR)
or TECHNICAL COMPUTING
3-4
ENGT 33700 QUALITY TECHNIQUES 3
OTEC 26636 PROJECT MANAGEMENT FOR ADMINISTRATIVE PROFESSIONALS 1
Concentration Elective 3
Kent Core Requirement 3
 Credit Hours13
Semester Six
ECON 22060 PRINCIPLES OF MICROECONOMICS (KSS) 3
ENGR 36620 PROJECT MANAGEMENT IN ENGINEERING 3
ENGT 31010 ENGINEERING AND PROFESSIONAL ETHICS 3
ENGT 32006 ECONOMIC DECISION ANALYSIS FOR ENGINEERING TECHNOLOGY 3
Kent Core Requirement 3
 Credit Hours15
Semester Seven
ENGR 43080 INDUSTRIAL AND ENVIRONMENTAL SAFETY 3
ENGT 42003 LEAN AND SIX SIGMA FOR COMPETITIVE MANUFACTURING 3
ENGT 43363 MATERIALS SCIENCE AND TECHNOLOGY 3
General Elective 4
Kent Core Requirement 3
 Credit Hours16
Semester Eight
ENGR 31000
or ENGT 33092
 CULTURAL DYNAMICS TECHNOLOGY (WIC)
or ENGINEERING TECHNOLOGY INTERNSHIP AND PROFESSIONAL DEVELOPMENT (ELR) (WIC)
3
ENGT 43099 ENGINEERING TECHNOLOGY CAPSTONE (ELR) 3
Concentration Electives 6
General Elective 3
 Credit Hours15
 Minimum Total Credit Hours:120
 

Mechanical/Systems Concentration

This roadmap is a recommended semester-by-semester plan of study for this program. Students will work with their advisor to develop a sequence based on their academic goals and history. Courses designated as critical (!) must be completed in the semester listed to ensure a timely graduation.

Plan of Study Grid
Semester OneCredits
MATH 11010 ALGEBRA FOR CALCULUS (KMCR) 3
UC 10001 FLASHES 101 1
American Civic Literacy Requirement 3
Applied Electives 6
General Elective 3
 Credit Hours16
Semester Two
MATH 11022 TRIGONOMETRY (KMCR) 3
Applied Electives 9
Kent Core Requirement 3
 Credit Hours15
Semester Three
ENG 20002
or OTEC 26638
 INTRODUCTION TO TECHNICAL WRITING
or BUSINESS COMMUNICATIONS
3
MATH 11012 INTUITIVE CALCULUS (KMCR) 3
Physics Elective 3-5
Applied Electives 6
 Credit Hours15
Semester Four
OTEC 26636 PROJECT MANAGEMENT FOR ADMINISTRATIVE PROFESSIONALS 1
Physics Elective 3-5
Applied Electives 6
Kent Core Requirement 3
General Elective 3
 Credit Hours17
Semester Five
CS 10051
or EERT 32003
 COMPUTER SCIENCE PRINCIPLES (KMCR)
or TECHNICAL COMPUTING
3-4
ECON 22060 PRINCIPLES OF MICROECONOMICS (KSS) 3
ENGT 30000
or ENGT 43700
 ADVANCED MANUFACTURING
or COMPUTER-INTEGRATED MANUFACTURING
3
Concentration Elective 3
 Credit Hours12
Semester Six
ENGR 36620 PROJECT MANAGEMENT IN ENGINEERING 3
MERT 32004
or MERT 42000
 MACHINE DESIGN
or THERMODYNAMICS FOR ENGINEERING TECHNOLOGY
3
Concentration Electives 6
Kent Core Requirement 3
 Credit Hours15
Semester Seven
ENGT 31010 ENGINEERING AND PROFESSIONAL ETHICS 3
ENGT 33700 QUALITY TECHNIQUES 3
ENGT 43363 MATERIALS SCIENCE AND TECHNOLOGY 3
Kent Core Requirement 3
General Elective 3
 Credit Hours15
Semester Eight
ENGR 31000
or ENGT 33092
 CULTURAL DYNAMICS TECHNOLOGY (WIC)
or ENGINEERING TECHNOLOGY INTERNSHIP AND PROFESSIONAL DEVELOPMENT (ELR) (WIC)
3
ENGR 43080 INDUSTRIAL AND ENVIRONMENTAL SAFETY 3
ENGT 43099 ENGINEERING TECHNOLOGY CAPSTONE (ELR) 3
Kent Core Requirement 3
General Elective 3
 Credit Hours15
 Minimum Total Credit Hours:120

Program Delivery

  • Delivery:
    • In person
  • Location:
    • Tuscarawas Campus

Accreditation for Engineering Technology - B.S.

The Bachelor of Science degree in Engineering Technology is accredited by the Engineering Technology Accreditation Commission of ABET, www.abet.org.

Creativity + Technology = Help for Math Teachers Here and Abroad

Professor Karl Kosko shows a Kent-area public school teacher how to use a 3-D printer.

Teachers from northeast Ohio and from thousands of miles away in sub-Saharan Africa have been learning to create inexpensive math teaching tools thanks to the efforts of some 绿帽社 professors.  Professors Karl Kosko, Ph.D., Joanne Caniglia, Ph.D. and Rick Ferdig, Ph.D., all of whom teach in the School of Teaching, Learning and Curriculum Studies within the College of Education, Health and Human Services, earlier this year were awarded a $15,000 grant by the Martha Holden Jennings Foundation for their project, "Visualizing Math via Manipulatives."  The money will...

Subscribe to
漏 2026 绿帽社 All rights reserved.